Marquee Parts & Accessories

9m Base plate

With offset holes for internal or external staking. Galvanised.

9m eave knuckle

includes internal ring for attaching linings or marquee divisions. Galvanised finish.

12m eave knuckle

includes internal ring for attaching linings. Galvanised.

Gable leg extension

Extendable to suit the terrain. 9m gable leg is also used in the 12m wide frame.

Pins and clips for clear span frames

All those important items to hold your frames together - available in packs of ten.

Portal beams

Replaces scissors in a 3m bay to facilitate access. One size beam fits into a 3m bay on either a 9m or 12m wide clear span marquee frame. Galvanised finish.

Corner and T-pieces

Detachable eyebolts & D-clips included. 25mm square-section diagonals for easy grip. Gold coloured plated finish for comfortable handling. Spare aluminium poles also available to purchase.

Crown

Updated design with domed upper - helps marquee covers slide over easily & minimises roof wear. Integral ring on underside for easy attachment of marquee lighting/linings etc.

Small components

Twisting collars, eye-bolts, 3-button springs and D-clips available from stock.

Guy straps & guy ropes

Standard guys with spliced loop and integral shackle. or new guy straps available in white or orange.

Pillarless T-piece for tubular frame marquees

Allows you to off-set a marquee leg if needed, i.e. to avoid a doorway. Sliding T-piece also available.

Walling pegs for tubular frame marquees

Made from reinforcing steel for good grip.

Flagpole tops

Turn any pole into a flagpole, using this top piece and an adjustable foot. Fixes in place with a D-clip. Gold coloured finish.

French Door frames
Standard size takes any two 6’6” x 2’3” wooden doors. Can be used in clear span or tubular frame marquees. Also available with infill panels, sprung top bar and short side rails to fit 3m clear span bays.

3m Walkway System

Create extendable 3m walkways, using small roof beams, 3m x 3m roof panels and 3m gables, with your existing 9m clear span components.

Polework trailer
Store and transport clear span frames with one neat solution! Allows efficient handling of beams. Suitable for towing behind most 4x4s and vans. Available in single and twin-axle styles.

Base rails/banner frames

Multi-purpose fittings for hard surface installations - can also be used to make banner frames. Available as corner, T or end fittings, slides over tubular leg.

Linings bars & joiners

For frame & traditional style marquee - available in a range of styles & sizes, some available from stock.

(Not required for our tubular frames or 9m/12m clearspan linings).

Custom ridge bars

Allow the construction of non-standard size marquees such as 4m x 4.5m

Heater ducts

A neat solution for ugly ductings! Designed to neatly accommodate heater ducts in 3m clear span bays. Customised wall panels also available if required.